Een MTS schroefset met Eibach veren, geschikt voor de Audi A3 8P 8P1 1.2TSI / 1.4TFSI / 1.6 / 1.6 E-Power / 1.6FSI / 1.8TFSI / 2.0FSI / 2.0TFSI / 1.6TDI / 2.0TDI
Street variant
De ophanging van de Street-serie is de standaardconfiguratie van MTS Technik-ingenieurs, het garandeert een breed scala aan verlagingen en een balans tussen comfort en stijfheid.
Verlaging voorzijde: van 35 tot 70 mm
Verlaging achterzijde: van 35 tot 60 mm
Maximaal belasting (voor):1036 - 1170 kg
Maximaal belasting (achter):1150 kg
Geschikt voor:05/03 - 12/13
Let op:
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
Rear thread adjustment block is mounted on the top.
without Quattro
Een MTS schroefset met Eibach veren, geschikt voor de Audi A3 8P 8P1 1.2TSI / 1.4TFSI / 1.6 / 1.6 E-Power / 1.6FSI / 1.8TFSI / 2.0FSI / 2.0TFSI / 1.6TDI / 2.0TDI
Street variant
De ophanging van de Street-serie is de standaardconfiguratie van MTS Technik-ingenieurs, het garandeert een breed scala aan verlagingen en een balans tussen comfort en stijfheid.
Verlaging voorzijde: van 35 tot 70 mm
Verlaging achterzijde: van 35 tot 60 mm
Maximaal belasting (voor):1036 - 1170 kg
Maximaal belasting (achter):1150 kg
Geschikt voor:05/03 - 12/13
Let op:
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
Rear thread adjustment block is mounted on the top.
without Quattro
